410SS Performance Ultra Quiet Compressor 200 PSI / 0.64 CFM, Stealth Black

What is this part called?

Viair 410C Stealth Series 200 PSI Air Compressor

What does this part do?

This Viair 410C Stealth Series compressor is designed for high-performance air suspension and onboard air systems requiring quiet operation, dependable airflow and reliable performance up to 200 PSI.

The Stealth Series design uses upgraded internals, a redesigned compressor head and an integrated filter muffler arrangement to reduce operating noise compared with comparable conventional compressors.

With a 100% duty cycle at 100 PSI, the 410C Stealth is well suited to air ride management systems where regular compressor use and dependable tank recovery are required.

What are the key features?

• Viair 410C Stealth Series air compressor
• Stealth Black finish
• 12V operation
• Maximum working pressure: 200 PSI
• Airflow: Approximately 1.47 CFM at 0 PSI
• 100% duty cycle at 100 PSI
• 50% duty cycle at 200 PSI
• Designed for reduced operating noise
• Integrated air filter and muffler system
• Upgraded compressor internals
• Redesigned compressor head
• Spring-loaded vibration isolating mounts
• Black sleeved stainless steel braided leader hose
• Inline check valve helps prevent high-amperage restarts
• Thermal overload protection
• IP67 rated compressor construction
• Suitable for air suspension and onboard air systems

What are the compressor specifications?

• Voltage: 12V
• Maximum working pressure: 200 PSI
• Airflow at 0 PSI: Approximately 1.47 CFM
• Duty cycle: 100% at 100 PSI
• Duty cycle: 50% at 200 PSI
• Maximum amp draw: Approximately 23A
• Ingress protection rating: IP67
• Operating noise at 0 PSI: Approximately 61dB
• Dimensions: Approximately 12.5″ x 4.4″ x 7.3″
• Weight: Approximately 9.8lb
• Quantity: 1 compressor

What is included?

• 1 x Viair 410C Stealth Series air compressor
• Black sleeved stainless steel braided leader hose
• Inline check valve
• Remote mount air filter / muffler assembly
• Replacement air filter element
• Airline for remote mounting the air filter
• Spring-loaded vibration isolating feet
• Mounting hardware

Please Note

This listing is for one compressor only.

This compressor is designed for use within a correctly specified 12V air system. Appropriate wiring, relay, fusing and power supply capacity must be used to safely support the compressor load.

When installing into an air suspension system, ensure the air tank, pressure switch, valves, fittings and airline are all rated for the intended operating pressure.

Thread sealant should be used on suitable threaded connections during installation. Thread tape is not recommended for compressor fittings.

What is the SKU for this part?

SKU: 030010228

OE Reference: 41042-1
SKU: 030010228