410SS Performance Ultra Quiet Dual Pack Compressors 200 PSI / 0.64 CFM, Stealth Black

What is this part called?

Viair 410C Stealth Series Dual 200 PSI Air Compressor Pack

What does this part do?

This Viair 410C Stealth Series dual compressor pack is designed for high-performance air suspension and onboard air systems requiring quiet operation, strong airflow and reliable performance up to 200 PSI.

The Stealth Series design uses upgraded internals, a redesigned compressor head and integrated filter muffler assemblies to significantly reduce operating noise compared with comparable conventional compressors.

Supplied as a complete dual compressor package, the setup provides a combined airflow of 2.94 CFM at 0 PSI and a 100% duty cycle at 100 PSI, making it well suited to air ride management systems requiring dependable and frequent tank recovery.

What are the key features?

• Pair of Viair 410C Stealth Series compressors
• Stealth Black finish
• 12V operation
• Maximum working pressure: 200 PSI
• Combined airflow: 2.94 CFM at 0 PSI
• 100% duty cycle at 100 PSI
• 50% duty cycle at 200 PSI
• Designed for reduced operating noise
• Integrated air filter and muffler assemblies
• Upgraded compressor internals
• Redesigned compressor head
• Spring-loaded vibration isolating mounts
• Black sleeved stainless steel braided leader hoses
• Inline check valves help prevent high-amperage restarts
• Thermal overload protection
• IP67 rated compressor construction
• Suitable for air suspension and onboard air systems

What are the compressor specifications?

• Voltage: 12V
• Maximum working pressure: 200 PSI
• Combined airflow at 0 PSI: 2.94 CFM
• Duty cycle: 100% at 100 PSI
• Duty cycle: 50% at 200 PSI
• Maximum combined amp draw: 46A
• Maximum recommended air tank size: 10 Gallon
• Ingress protection rating: IP67
• Operating noise at 0 PSI: Approximately 61dB
• Dimensions: Approximately 12.5″ x 4.4″ x 7.3″
• Combined weight: Approximately 19.5lb
• Quantity: 2 compressors

What is included?

• 2 x Viair 410C Stealth Series air compressors
• Black sleeved stainless steel braided leader hoses
• Inline check valves
• Heavy duty pressure switch – 165 PSI on / 200 PSI off
• 40A 12V relays
• Remote mount 6-stage air filter / muffler assemblies
• Replacement air filter elements
• Airline for remote mounting the air filters
• Spring-loaded vibration isolating feet
• Mounting hardware

Please Note

These compressors are designed for use within a correctly specified 12V air system. Appropriate wiring, relays, fusing and power supply capacity must be used to safely support the compressor load.

When installing into an air suspension system, ensure the air tank, pressure switch, valves, fittings and airline are all rated for the intended operating pressure.

Thread sealant should be used on suitable threaded connections during installation. Thread tape is not recommended for compressor fittings.

What is the SKU for this part?

SKU: 030010227

OE Reference: 41042
SKU: 030010227