Description
CB PICT Center Section Manifold
Classic Aircooled VW Manifolds parts by Limebug
Bolt on up to 7hp!
Out flows factory manifolds up to 12%! Replace your rusty and carbon plugged manifold and increase performance at the same time.
Fits both early and late 6 and 12 volt Solex Carbs. Allows use of early or late, wide or narrow flange carbs and any combination of stock or high performance air cleaners.
Includes vacuum port for late throttle positioner or auto stick shift. PICT Center Section Manifolds can be used on all 1966 1300cc and later upright engines with use of dual port end pieces. End pieces are available at additional cost. Comes with an 1/8" Pipe Plug.
The new PICT Center Section is a true bolt on performance part.
The design of the inner passages increases the flow of intake gases while at the same time helps smooth out the reverse wave created when the intake flow is "pulsed" by the opening and closing of the intake valves.
The result is more useable horsepower from stock carburetors.
OE Reference: 3151
SKU: 010090082
CB PICT Center Section Manifold
£119.65inc 20% VAT
Bolt on up to 7hp!
OE Code: 3151
Description
CB PICT Center Section Manifold
Classic Aircooled VW Manifolds parts by Limebug
Bolt on up to 7hp!
Out flows factory manifolds up to 12%! Replace your rusty and carbon plugged manifold and increase performance at the same time.
Fits both early and late 6 and 12 volt Solex Carbs. Allows use of early or late, wide or narrow flange carbs and any combination of stock or high performance air cleaners.
Includes vacuum port for late throttle positioner or auto stick shift. PICT Center Section Manifolds can be used on all 1966 1300cc and later upright engines with use of dual port end pieces. End pieces are available at additional cost. Comes with an 1/8" Pipe Plug.
The new PICT Center Section is a true bolt on performance part.
The design of the inner passages increases the flow of intake gases while at the same time helps smooth out the reverse wave created when the intake flow is "pulsed" by the opening and closing of the intake valves.
The result is more useable horsepower from stock carburetors.
OE Reference: 3151
SKU: 010090082
Additional information
3151
Related Products
Manifold boot for air intake
CB Space Saver Manifold Dual Dellorto DRLA & Weber IDF Dual Port
CB IDF-DRLA Manifolds to fit Competition Eliminators
CB Low Profile Manifold with heat risers
CB Manifolds Big Beef IDF Intake w/studs, nuts inc gaskets
Jubilee Clip / Clamp for Air Intake Manifold Rubber Boot, Small
CB Manifold Dual 34mm ICT Weber Dual Port
CB Manifold Dual Dellorto DRLA & Weber IDF Offset Dual Port
CB Manifold Dual 34mm ICT Weber – Dual Port
Jubilee Clip / Clamp for Air Intake Manifold Rubber Boot, Large
Beetle 1960-79 Inlet Manifold Boots Red Urethane, Each
Single Port Intake Manifold, For Beetle, 1300-1600cc Engine
CB Manifolds Big Beef Intake Dual Weber 48mm IDA Weber Dual Port
Intake Manifold with dual port 35mm base, Single Pre-Heat
CB Manifolds Dual 34mm ICT Weber Single Port