Description

Grinds Pressure Based Digital Air Ride Management System

Classic Aircooled VW Air Management Systems parts by Limebug

Grinds DE’s newest digital based pressure system which optimises quicker inflation and deflation rates and ensures maximum safety for users whilst driving. The new innovation speed control, whereby the valve unit recognizes the smallest bumps and makes the system no longer operable. Another feature was implemented in the area of safety and legalization in road traffic.

As you can see, safety has top priority with the new Grinds control and completes the system with the integrated pressure loss warning buzzer. Minimum and maximum pressure setting can be adjusted quickly and easily in the menu navigation.

Supplied with the new wireless controller which also has a battery status display ensuring you never lose functionality. 

New revised valve block also has a finely finished housing, equipped with an illuminated Grinds emblem, perfect finish touch for any boot build/display.

The system has a Three-language menu navigation in German, English and Spanish.

Tested accessories supplied, such as the 200A relay, guarantee no additional costs for putting a second compressor into operation.

The valve block can be integrated even more easily into your hardline configuration thanks to the vertically attached 1/4" internal thread, also perfect for swapping out fittings where required and no need to worry about sealed cartridge fittings leaking.

Features of the new grinds control:

– 2 inlets and 2 outlets meaning faster inflation/deflation rates
– Twice as fast and more precise than its predecessor
– Speedcontrol locks after 10 seconds. the control to get it StVzo compliant. (German Road Vehicle Registration Regulation)
– Warning buzzer adjustable in the controller for max & min pressure
– Upgradable to height sensors
– Grind's logo on the valve block illuminated in LED White, perfect for your show expansion
– Pressure unit selectable to display pressures in either BAR or PSI
– Integrated app for mobile use on IOS or Android
– Second Compressor Compatible with no additional wiring.

Kit contents: 

– The Grinds control is delivered in a high-quality magnet box and foam inserts 
– Valve block with 8x 1/4" female thread (2x Outlet, 4x For Individual Corner Controls, 2x Inlet)
– Controller with 6m jack cable 
– 2x silencers 
– 18m polyamide cable
– Fuse holder / electronics accessories up to 6m ignition plus and 10qmm2 permanent plus line 
– 1m ground line in 10qmm2
– Water separator Black powder-coated, made of high-strength aluminum, manual drainage and low-maintenance. 
– Pressure sensor integrated in the valve block
– Installation instructions as well as user manual in German/English 
– Safety valve 
– Hose cutter 
– 200 Amp Relay + 70Amp Glass Fuse

SKU: 030010407