16 x 6.5 / 7.5 FU30 by OOD 3-Piece Alloy Wheels 5x130 PCD (Each)

16 x 5.5 / 6.5 FU30 by OOD 3-Piece Alloy Wheels 5x130 PCD (Each) Three Piece Split Porsche Alloy Wheels OOD Designs Ultimate Porsche FU30 Alloy Wheels…

  • 050010115

  • Limebug

  • Special Order Item (Estimated 4 Weeks)

£870.00

16 x 5.5 / 6.5 FU30 by OOD 3-Piece Alloy Wheels 5x130 PCD (Each)

Three Piece Split Porsche Alloy Wheels

OOD Designs Ultimate Porsche FU30 Alloy Wheels

The FU30 16" Billet Alloy Wheels are the ultimate homage to the early Fuch 5 petal. Reverse taper front to back across a contoured face with all flush fit hardware. Stainless Radinox Dishes, and floating profiled spokes

We offer service to vibrapolish these wheels post machining, please get in touch for details.

These wheels will all be custom engraved and heavily limited sets.

Each set is produced at a financial loss, so we heavily limit the production on these wheels. If interested please get in touch directly prior to purchase to discuss your needs and final application so your set can be Taylor made to fit your application.

Wheels are staggered 6.5Jx16" Front, 7.5Jx16" Rear.

Specs Below:

- Wheel Diameter: 16"
- Wheel Width (J Value): 6.5-7.5"
- ET (Offset): Various
- PCD: 5x130
- Centre Cap: Included
- Mounting Hardware: Available Separately
- Quantity: Listing for one wheel, (Each)

 Wheel Terminology, PCD, Offset, J & ET Explained

What is ET?

Often times you will hear people talk about ET on a wheel, it may seem strange that ET is actually the term for offset despite the abbreviation not resembling the meaning at all the reason for this is because it is derived from the german word 'Einpresstiefe'.

So next is understanding where to measure to and from. ET is always measured from the imaginary centre line of the wheel as you can see to the left. 

Nearly all wheels you will find will be positive offset, their is a number of reasons linking to better balance of rotating mass, caliper clearance and reducing the overall width of the vehicle, however there are some exceptions.

So for the measuring process for an ET45 Offset you would take your imaginary centre line and measure 45mm toward the face of the wheel and this would be the position where the hub will mount to the wheel. 

What is PCD?

PCD, or Pitch Circle Diameter is the diameter of which wheel studs are apart through centre of the hub. PCD fitments are a measurement showing the number of studs/bolts followed by the distance they are apart. The distance is usually shown in millimetres. So a PCD of 4x130 would mean that there are 4 studs or bolt holes evenly spaced around a circle with a diameter of 130mm.

What is 'J' Width?

The letter that typically denotes the distance between the rim edges, not including the rolled edge. The terminology refers to the sectional profile of the wheel, it just happens to be the point which most manufacturers use, probably because it is a relevant measurement for choosing tyre size and is a critical measurement far more than the lip itself which could vary massively from company to company.

width figures are easily calculated with a tape measure, and can normally be found stamped in the wheel, in the cross-section on the left you can see the area highlighted in red to visually represent where this measurement is taken from.

Classic VW Parts, Spares & Accessories
SERVICES

Amazing Customer Service

Everyone on our customer care team is an experienced VW owner and works in our office. Rest easy knowing real people are ready to help you.

Nothing is ever outsourced.View All Products

Latest How To Guide

'67 Reed Green Beetle

The two year project to build a car that was missing everything   So I was at the DTA meet a few years ago Stef was selling his old car in parts, his shell caught my eye as it looked pretty solid and mostly reasonably shape. We settled on a price…

Read More