Description
1964-67 Split Screen 3.5″ Fully Built Dropped Spindles (Drum) – (Exchange)
Classic Aircooled VW Steering Knuckles and Spindles parts by Limebug
Split Screen 3.5″ dropped spindles to fit T2 1955-67 Models
Assembled from original cores, flipped, machined and re-worked.
A smoother ride for link pin front ends. These Dropped Spindles are .
Price based on carrier exchange
Professionally installed, powdercoated, thrust set, and pressed in ready to install. We fit new bronze King pin bushes on all our rebuilt spindles. Fitted with new genuine VW seals and german grease nipples. The track rod fixing is reverse tappered for larger track rod to aid chassis clearance.
Link pins, races and bearings are not supplied but are available in stock should you require them. The fitting of new link pins, bearings etc is recommended. Why fit old parts back on while the assemblies are apart, contact us for more info?
Note: Link Pin Dropped Spindles drop your ride a full 3 1/2″ and will not increase track width.
Details:
– Rebuilding service may take upto3 weeks to complete, some cores are held on the shelf, contact us for more details
Works with:
– VW Drums
– Standard Length Shocks
– Standard VW bearings and seals
OE Reference: 211-405-311/A
SKU: 030040107
1964-67 Split Screen 3.5″ Fully Built Dropped Spindles (Drum) – (Exchange)
From $857.85
Split Screen 3.5″ dropped spindles to fit T2 1955-67 Models
OE Code: 211-405-311/A
Description
1964-67 Split Screen 3.5″ Fully Built Dropped Spindles (Drum) – (Exchange)
Classic Aircooled VW Steering Knuckles and Spindles parts by Limebug
Split Screen 3.5″ dropped spindles to fit T2 1955-67 Models
Assembled from original cores, flipped, machined and re-worked.
A smoother ride for link pin front ends. These Dropped Spindles are .
Price based on carrier exchange
Professionally installed, powdercoated, thrust set, and pressed in ready to install. We fit new bronze King pin bushes on all our rebuilt spindles. Fitted with new genuine VW seals and german grease nipples. The track rod fixing is reverse tappered for larger track rod to aid chassis clearance.
Link pins, races and bearings are not supplied but are available in stock should you require them. The fitting of new link pins, bearings etc is recommended. Why fit old parts back on while the assemblies are apart, contact us for more info?
Note: Link Pin Dropped Spindles drop your ride a full 3 1/2″ and will not increase track width.
Details:
– Rebuilding service may take upto3 weeks to complete, some cores are held on the shelf, contact us for more details
Works with:
– VW Drums
– Standard Length Shocks
– Standard VW bearings and seals
OE Reference: 211-405-311/A
SKU: 030040107
Additional information
211-405-311/A
Related Products
T2 Split Screen / Bay Window Complete Adjuster Kit Pair, Broached Centre Core, All Years
T2 Bay Window / Split Screen Rubber Smooth 2 3/8″ Spring Plate Bush, Pair
(-65 Front / -79 Rear Beetle) T2 (1954-67 Split Screen Front / Rear) Spax Adjustable Lowered Gas Shock Absorbers (244-357mm), Pair
Early Spindle Nut Retaining Lock Plate
1954-67 Split Screen 4″ Narrowed Elite Series Adjustable Beam
(-65 Front / -79 Rear Beetle) T2 (1954-67 Split Screen Front / Rear) Standard COFAP Gas Shock Absorber, Pair
Lock Nut for Grub Screw Bolt for Trailing Arms (Pinch Bolt)
Adjust-a-Raise Adjustable Gearbox / Trans Raise, Stock to 1″, Raw
Crank Distributor Drive Gear (Dizzy Drive)
1964-67 Split Screen Link Pin Kit
T2 Bay / Split Track / Tie Rods (All Sizes Narrowed & Stock)
T1 Engine Gasket Kit 1300-1600cc, Single & Twinport Kit, Elring
T2 1964-67 Split Screen Beam to Trailing arm Bump Stop
T2 1950-67 Split Screen Steering Pin Kit (OE Quality)
Splitscreen / Bay Window Spax Adjustable Lowered Gas Shock Absorbers (254-377mm), Pair
T2 1950-63 Split Screen Link Pin Kit