Description
T1 Engle W120 Racing Camshaft (0.397″ Lift / 294 Adv Dur)
Classic Aircooled VW Camshafts and Kits parts by Limebug
Designed for use with a 3 bolt cam wheel and a pre 1971 oil pump. Well suited for higher CC engines or 1.1 or 1.25 rocker assemblies.
This camshaft is supplied without a drive wheel which must be purchased separately, you should always fit new cam followers with a new camshaft
Specifcations:
– .397″ Cam Lift
– .435″ Valve Lift (1.1 Rockers) .
– 294 degrees of advertised duration
– 253 degrees of duration at .050″ at a 108 Lobe center.
You should always follow the break in instructions supplied with camshafts to ensure long life of the camshaft and followers
SKU: 010070012
T1 Engle W120 Racing Camshaft (0.397″ Lift / 294 Adv Dur)
£187.95
Designed for use with a 3 bolt cam wheel and a pre 1971 oil pump. Well suited for higher CC engines or 1.1 or 1.25 rocker assemblies.
OE Code: 20005
Want to be notified when this product is back in stock?
Description
T1 Engle W120 Racing Camshaft (0.397″ Lift / 294 Adv Dur)
Classic Aircooled VW Camshafts and Kits parts by Limebug
Designed for use with a 3 bolt cam wheel and a pre 1971 oil pump. Well suited for higher CC engines or 1.1 or 1.25 rocker assemblies.
This camshaft is supplied without a drive wheel which must be purchased separately, you should always fit new cam followers with a new camshaft
Specifcations:
– .397″ Cam Lift
– .435″ Valve Lift (1.1 Rockers) .
– 294 degrees of advertised duration
– 253 degrees of duration at .050″ at a 108 Lobe center.
You should always follow the break in instructions supplied with camshafts to ensure long life of the camshaft and followers
SKU: 010070012
Additional information
20005
Related Products
T2 1950-67 Split Screen Steering Pin Kit (OE Quality)
T2 -67 Split Screen IRS Conversion Swing Arm Brackets
1955-67 Split Screen Raised Front Arch Tubs, 40mm, for Lowered Bus
Adjust-a-Raise Adjustable Gearbox / Trans Raise, Stock to 1″, Raw
1950-79 Rear Hub Axle Driveshaft Seal Kit, One Side
T2 Split Screen / Bay Window Complete Adjuster Kit Pair, Broached Centre Core, All Years
T2 1964-67 Split Screen Beam to Trailing arm Bump Stop
1955-63 Split Screen Drum 3.5″ Fully Built Dropped Spindles
(-65 Front / -79 Rear Beetle) T2 (1954-67 Split Screen Front / Rear) Standard COFAP Oil Damper, Pair
Upto 72 Rear Gearbox Transmission, Rubber
T2 1950-63 Split Screen Link Pin Kit
1954-67 Split Screen 4″ Narrowed Elite Series Adjustable Beam
Early Spindle Nut Retaining Lock Plate
Lock Nut for Grub Screw Bolt for Trailing Arms (Pinch Bolt)
(-65 Front / -79 Rear Beetle) T2 (1954-67 Split Screen Front / Rear) Spax Adjustable Lowered Gas Shock Absorbers (281-431mm), Pair
T1 Oil Pump 26mm for 3 Bolt Camshafts