Description
LMZ 1670 Gold Diamond Cut 16 x 7″ 5×130 PCD
Classic Aircooled VW Alloy Wheels parts by Limebug
16" aluminium version of the classic 15 x 4.5" steel wheel, with all the looks but in 6", at a fraction of the weight.
It is advised not to run hub caps, being steel, they will mark the softer aluminium.
Wheel Details:
– 16" x 7"
– ET23.3
Detail
– Centre Cap: Available Separately
– Mounting Hardware: Available Separately
– Quantity: Listing for one wheel, (Each)
Wheel Terminology, PCD, Offset, J & ET Explained
Often times you will hear people talk about ET on a wheel, it may seem strange that ET is actually the term for offset despite the abbreviation not resembling the meaning at all the reason for this is because it is derived from the german word ‘Einpresstiefe’.
So next is understanding where to measure to and from. ET is always measured from the imaginary centre line of the wheel as you can see to the left.
Nearly all wheels you will find will be positive offset, their is a number of reasons linking to better balance of rotating mass, caliper clearance and reducing the overall width of the vehicle, however there are some exceptions.
So for the measuring process for an ET45 Offset you would take your imaginary centre line and measure 45mm toward the face of the wheel and this would be the position where the hub will mount to the wheel.
What is PCD?
PCD, or Pitch Circle Diameter is the diameter of which wheel studs are apart through centre of the hub. PCD fitments are a measurement showing the number of studs/bolts followed by the distance they are apart. The distance is usually shown in millimetres. So a PCD of 4×130 would mean that there are 4 studs or bolt holes evenly spaced around a circle with a diameter of 130mm.
What is ‘J’ Width?
The letter that typically denotes the distance between the rim edges, not including the rolled edge. The terminology refers to the sectional profile of the wheel, it just happens to be the point which most manufacturers use, probably because it is a relevant measurement for choosing tyre size and is a critical measurement far more than the lip itself which could vary massively from company to company.
SKU: 050010197
![Limebug Facebook Icon](https://limebug.com/wp-content/uploads/2021/10/LimebugFacebookIcon.png)
LMZ 1670 Gold Diamond Cut 16 x 7″ 5×130 PCD
£474.95
16" aluminium version of the classic 15 x 4.5" steel wheel, with all the looks but in 6", at a fraction of the weight.
Description
LMZ 1670 Gold Diamond Cut 16 x 7″ 5×130 PCD
Classic Aircooled VW Alloy Wheels parts by Limebug
16" aluminium version of the classic 15 x 4.5" steel wheel, with all the looks but in 6", at a fraction of the weight.
It is advised not to run hub caps, being steel, they will mark the softer aluminium.
Wheel Details:
– 16" x 7"
– ET23.3
Detail
– Centre Cap: Available Separately
– Mounting Hardware: Available Separately
– Quantity: Listing for one wheel, (Each)
Wheel Terminology, PCD, Offset, J & ET Explained
Often times you will hear people talk about ET on a wheel, it may seem strange that ET is actually the term for offset despite the abbreviation not resembling the meaning at all the reason for this is because it is derived from the german word ‘Einpresstiefe’.
So next is understanding where to measure to and from. ET is always measured from the imaginary centre line of the wheel as you can see to the left.
Nearly all wheels you will find will be positive offset, their is a number of reasons linking to better balance of rotating mass, caliper clearance and reducing the overall width of the vehicle, however there are some exceptions.
So for the measuring process for an ET45 Offset you would take your imaginary centre line and measure 45mm toward the face of the wheel and this would be the position where the hub will mount to the wheel.
What is PCD?
PCD, or Pitch Circle Diameter is the diameter of which wheel studs are apart through centre of the hub. PCD fitments are a measurement showing the number of studs/bolts followed by the distance they are apart. The distance is usually shown in millimetres. So a PCD of 4×130 would mean that there are 4 studs or bolt holes evenly spaced around a circle with a diameter of 130mm.
What is ‘J’ Width?
The letter that typically denotes the distance between the rim edges, not including the rolled edge. The terminology refers to the sectional profile of the wheel, it just happens to be the point which most manufacturers use, probably because it is a relevant measurement for choosing tyre size and is a critical measurement far more than the lip itself which could vary massively from company to company.
SKU: 050010197
Additional information
Related Products
TT 1560 Sand Blasted / Matt Clear 15 x 6″ 5×130 PCD
4.5″ x 15″ Chrome / Gloss Black Correctly Detailed Fuch
HF 1550 Heritage Silver Diamond Cut 15 x 5″ 5×130 PCD
TT 1550 Grey / Black 15 x 5″ 5×130 PCD
15 x 5.5 Chrome Fuchs Wheel 5×130 PCD ET45, Each
TT 1560 Grey / Black 15 x 6″ 5×130 PCD
TT 1550 Sand Blasted / Matt Clear 15 x 5″ 5×130 PCD
HF 1560 Heritage Silver Diamond Cut 15 x 6″ 5×130 PCD
15 x 5.5 Flat 4 Fuchs Chrome Alloy Wheels 5×130 PCD ET45, Each
6″ x 15″ Chrome / Gloss Black Correctly Detailed Fuch
LMZ 1660 Gold Diamond Cut 16 x 6″ 5×130 PCD
PAG 1670 Campagnolo Satin Gold 16 x 7″ 5×130 PCD
15 x 4.5 Flat 4 Fuchs Chrome Alloy Wheels 5×130 PCD ET45, Each
15 x 6 Flat 4 Fuchs Chrome Alloy Wheels 5×130 PCD ET35, Each