Stop light visibility was never a strong point for the classic Beetle. Now, Beetle owners can upgrade their stop, turn, and taillights to the latest in LED lighting technology. The all new LED retro-fit kit snaps into a stock 1956-61 VW Beetle taillight housing and converts all rear lighting functions to bright and visible LED lights. The installation takes about 30 minutes and requires no electrical knowledge.
At the heart of the new kit is the manufactured LED array that incorporates fourteen, automotive grade LEDs. This guarantees ultra bright performance, a wide dispersion angle, and maximum visibility of the tail light, stop light, and turn signals. The LED array is expected to last for the life of the vehicle and draws very little electrical current. The kit is backed by lifetime warranty. These are compatible only with 12 volt, negative ground cars.
Of course, the classic “snowflake” design was maintained in the all new acrylic lens. The lens is manufactured from new tooling and is designed to enhance the LED light. Stock appearance is maintained when the lights are off.
The LED retro-fit kit ships assembled and ready to install. The kit includes the LED array, a molded acrylic lens, lens-to-taillight housing gasket, 24 inch wiring pigtail, stainless base and hardware, and installation instructions. 12 volt, negative ground only.
Stop light visibility was never a strong point for the classic Beetle. Now, Beetle owners can upgrade their stop, turn, and taillights to the latest in LED lighting technology. The all new LED retro-fit kit snaps into a stock 1956-61 VW Beetle taillight housing and converts all rear lighting functions to bright and visible LED lights. The installation takes about 30 minutes and requires no electrical knowledge.
At the heart of the new kit is the manufactured LED array that incorporates fourteen, automotive grade LEDs. This guarantees ultra bright performance, a wide dispersion angle, and maximum visibility of the tail light, stop light, and turn signals. The LED array is expected to last for the life of the vehicle and draws very little electrical current. The kit is backed by lifetime warranty. These are compatible only with 12 volt, negative ground cars.
Of course, the classic “snowflake” design was maintained in the all new acrylic lens. The lens is manufactured from new tooling and is designed to enhance the LED light. Stock appearance is maintained when the lights are off.
The LED retro-fit kit ships assembled and ready to install. The kit includes the LED array, a molded acrylic lens, lens-to-taillight housing gasket, 24 inch wiring pigtail, stainless base and hardware, and installation instructions. 12 volt, negative ground only.
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. These cookies ensure basic functionalities and security features of the website, anonymously.
Cookie
Duration
Description
cookielawinfo-checkbox-analytics
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional
11 months
The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance
11 months
This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy
11 months
The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.
T1 1956-61 Beetle LED Tail / Brake Light Conversion Kit (includes lens), 12V
£93.50
Stop light visibility was never a strong point for the classic Beetle. Now, Beetle owners can upgrade their stop, turn, and taillights to the latest in LED lighting technology. The all new LED retro-fit kit snaps into a stock 1956-61 VW Beetle taillight housing and converts all rear lighting functions to bright and visible LED lights. The installation takes about 30 minutes and requires no electrical knowledge.
At the heart of the new kit is the manufactured LED array that incorporates fourteen, automotive grade LEDs. This guarantees ultra bright performance, a wide dispersion angle, and maximum visibility of the tail light, stop light, and turn signals. The LED array is expected to last for the life of the vehicle and draws very little electrical current. The kit is backed by lifetime warranty. These are compatible only with 12 volt, negative ground cars.
Of course, the classic “snowflake” design was maintained in the all new acrylic lens. The lens is manufactured from new tooling and is designed to enhance the LED light. Stock appearance is maintained when the lights are off.
The LED retro-fit kit ships assembled and ready to install. The kit includes the LED array, a molded acrylic lens, lens-to-taillight housing gasket, 24 inch wiring pigtail, stainless base and hardware, and installation instructions. 12 volt, negative ground only.
Description
T1 1956-61 Beetle LED Tail / Brake Light Conversion Kit (includes lens), 12V
Classic Aircooled VW Tail Lights parts by Limebug
T1 1956-61 Beetle LED Tail / Brake Light Conversion Kit (includes lens), 12V
Aircooled VW Custom LED Rear Lights
Stop light visibility was never a strong point for the classic Beetle. Now, Beetle owners can upgrade their stop, turn, and taillights to the latest in LED lighting technology. The all new LED retro-fit kit snaps into a stock 1956-61 VW Beetle taillight housing and converts all rear lighting functions to bright and visible LED lights. The installation takes about 30 minutes and requires no electrical knowledge.
At the heart of the new kit is the manufactured LED array that incorporates fourteen, automotive grade LEDs. This guarantees ultra bright performance, a wide dispersion angle, and maximum visibility of the tail light, stop light, and turn signals. The LED array is expected to last for the life of the vehicle and draws very little electrical current. The kit is backed by lifetime warranty. These are compatible only with 12 volt, negative ground cars.
Of course, the classic “snowflake” design was maintained in the all new acrylic lens. The lens is manufactured from new tooling and is designed to enhance the LED light. Stock appearance is maintained when the lights are off.
The LED retro-fit kit ships assembled and ready to install. The kit includes the LED array, a molded acrylic lens, lens-to-taillight housing gasket, 24 inch wiring pigtail, stainless base and hardware, and installation instructions. 12 volt, negative ground only.
SKU: 100010075
Additional information
Related Products
Beetle / Ghia Gen-II Shock Towers Jawbreaker for Air Ride Beams, 6″ Narrowed Fitment (Also Trekker 2″ Fit), Pair
Beetle / Ghia Sawtooth Skid Plate
Beetle / Ghia / Type 3 IRS 2″ Dropped Air Ride Spring Plates
1961-72 Beetle / Ghia Complete Gearbox / Trans Mount Kit, w/ Hardware
1966-79 Beetle / Ghia 4″ Narrowed Ball Joint Deluxe Cantilever Swing Axle / IRS Air Ride Kit
1950-65 Beetle / Ghia 4″ Narrowed Link Pin Complete Swing Axle Lowering Kit
1961-79 Late Beetle Air Ride Under Bonnet Management Mount / Cradle system, Black
1961-79 Late Beetle Air Ride Under Bonnet Management Mount / Cradle system, Raw
1948-65 Link Pin Beetle / Ghia Complete Cantilever Swing Axle / IRS Air Ride Kit
Beetle / Ghia Gen-II Shock Towers Titan for Static Beams Stock – 4″ Narrowed Fitment, Pair
Beetle / Ghia Gen-II Shock Towers Jawbreaker for Air Ride Beams Shorty Style (Beach Buggy / 356 Reps), Stock – 4″ Narrowed Fitment, Pair
Beetle / Ghia Gen-II Shock Towers Titan for Static Beams, Stock – 4″ Narrowed Fitment, Pair
Beetle / Ghia / Type 3 IRS Rear Lowering Kit
1958-67 RHD Beetle Glovebox Air Right Management Gauge Mount
Beetle / Ghia Gen-II Shock Towers Jawbreaker for Air Ride Beams, Stock – 4″ Narrowed Fitment, Pair
Adjust-a-Raise Adjustable Gearbox / Trans Raise, Stock to 1″, Raw